Home > HDPE Smooth Geomembrane >

Smooth HDPE Geomembrane For Reservoir And Artificial Lake

Product Categories

HDPE Smooth Geomembrane [52]
HDPE Textured Geomembrane [31]
Compound Geomembrane [35]
Long Fiber Geotextile [31]
Staple Fiber Geotextile [25]
Drainage Geonet [29]
Bentonite Geosynthetic Clay Liner [32]
Geotextile Bag [20]
Biaxial Plastic Geogrid [63]
Impervious Geotextile [2]
Drainage Geotextile Filter Fabric [6]
Anti Seepage Geotextile [2]
Woven Geotextile [5]
Cement Blanket [1]

Changsha Jian-Yi New Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Smooth HDPE Geomembrane For Reservoir And Artificial Lake

Ask Lasest Price
Brand Name :	JianYi
Certification :	ISO9001

Add to Cart

Product Details
Company Profile

Smooth HDPE Geomembrane For Reservoir And Artificial Lake

Geomembrane For Impermeability Of Reservoir And Artificial Lake

Product Introduction
Smooth geomembrane is a type of geomaterial with a smooth surface, usually made of high-density polyethylene, which has excellent chemical resistance and environmental stress cracking resistance. It is mainly used for seepage prevention and isolation.

Product Properties
1. Impermeability: The impermeability coefficient of the smooth geomembrane is very high, which can effectively prevent the penetration of water and pollutants.
2. Chemical resistance: It can resist the attack of many chemical substances, including acids, bases and salts.
3. Resistance to environmental stress cracking: it can remain stable in harsh environments such as ultraviolet light and temperature changes.
4. Tensile strength: It has high tensile strength and elongation, and can withstand certain water pressure and adapt to foundation deformation.

Product Application
1. Landfill: Used as an impermeable layer to prevent contaminants from seeping into groundwater.
2. Tailings storage yard: prevent harmful substances in tailings from penetrating into the environment.
3. Channel seepage prevention: used in agricultural irrigation channels to reduce water loss.
4. Dam anti-seepage: enhance the anti-seepage capacity of the dam to prevent water penetration.
5. Subway engineering: waterproof layer for subway tunnels.
6. Artificial lakes and reservoirs: as impermeable layers, maintain the stability of water bodies.

Product Specification
* Thickness(mm): 0.30mm~3.00mm
* Width:1m~9m
* Roll length: 30m~100m (customized request accept)
PS: Customized request accept for all above.

Geomembrane Series
Smooth HDPE Geomembrane For Landfill (GH-2S & GB/T 17643-2011)

Specification	0.75mm	1.00mm	1.25mm	1.50mm	2.00mm	2.50mm	3.00mm	Remark
Item
Thickness (mm)	0.75mm	1.00mm	1.25mm	1.50mm	2.00mm	2.50mm	3.00mm
Density (g/c㎡,≥)	0.939
Tensile Properties
Yield Strength (N/mm,LD/TD)	11	15	18	22	29	37	44
Breaking Strength (N/mm,LD/TD)	20	27	33	40	53	67	80
Yeild Elongation Rate (%)	12
Breaking Elongation Rate (%)	700
Rectangular Tear Strength (N)	93	125	156	187	249	311	374
Puncture Strength (N)	240	320	400	480	640	800	960
Environmental Stress Crack Resistance (h) (A single point of incision constant tensile method)	300
Carbon Black
Carbon Black Content(Rang) (%)	2.0~3.0
Carbon Black Dispersion	Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3
Oxidative Induction Time (OIT)
Standard OIT (min)	100
High Pressure OIT (min)	400
85℃ Oven Ageing (Minimum Average)
90 days after baking, the standard OIT retention(%)	55
90 days after baking, the hight pressure OIT retention(%)	80
The Anti-UV Strength
Ultraviolet irradiation after 1600 hours, the standard OIT retention(%)	50
Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%)	50
-70℃ The Low Temperature Embrittlement Performance mpact	Pass
Water Vapor Penetration Coefficient g.cm (cm2.s.Pa)	≤1.0X10-13
Dimensional Stability	±2

Product Specification and Technical Index (GH-1 & GB/T 17643-2011)

Specification Item	0.30	0.50	0.75	1.00	1.25	1.50	2.00	2.50	3.00	Remark
Thickness (mm)	0.30	0.50	0.75	1.00	1.25	1.50	2.00	2.50	3.00
Density (g/c㎡,≥)	0.94
Tensile Yield Strength (N/mm, ≥,LD/TD)	4	7	10	13	16	20	26	33	40
Tensile Breaking Strength (N/mm, ≥,LD/TD)	6	10	15	20	25	30	40	50	60
Yield Elongation Rate (%,≥,LD/TD)	-	-	-	11
Breaking Elongation Rate (%,≥,LD/TD)	600
Rectangular Tear Load (N,≥,LD/TD)	34	56	84	115	140	170	225	280	340
Puncture Strength (N,≥)	72	120	180	240	300	360	480	600	720
Carbon Black Content (%)	2.0~3.0
Carbon Black Dispersion	Less than 1date of Grade 3 out of 10 data, grade 4,grade 5 is not allowed

Product Tags:


*From:	Your email address is incorrect!
*To:	Changsha Jian-Yi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!