Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | JianYi |
Certification : | ISO9001 |
Long Fiber Geotextile For Beach Embankment And Harbor Pier
Reinforcement
Product Introduction
Long fiber geotextile is a geosynthetic material made directly from
polyester by spinning and needle consolidation. Product
specifications can be selected from 100-800g/m², and the fibers are
arranged into a three-dimensional structure. It has good mechanical
function, good water permeability, and can resist corrosion,
anti-aging. In addition, it can also adapt to the uneven base,
resist the damage of external construction force, creep becomes
smaller, and can maintain the original function even under
long-term load.
Product Properties
Good mechanical function, water permeability, corrosion resistance,
aging resistance, and can adapt to uneven base, resist construction
external force damage, creep becomes smaller, even under long-term
load can still maintain the original function.
Product Application
Long fiber geotextile has been widely used in many fields. In water
conservancy projects, it can be used for dam and slope protection
filtration, channel isolation, seepage prevention. It also plays an
important role in the foundation isolation, anti-filtration,
drainage, soil slope, retaining wall, pavement reinforcement and
drainage of roads, railways and airport runways. In addition, it is
also suitable for the soft foundation treatment of port
engineering, beach embankment, harbor pier and breakwater
reinforcement, drainage and so on.
Product Specification
* Grams/㎡: 100g~800g/㎡
* Width: 1.0m~6.60m
* Roll length: 50m~200m (customized request accept)
PS: Customized request accept for all above.
Product Specification and Technical Index(GB/T 17639—2023)
Item |
| ||||||||||
Nominal strength/(KN/m) | |||||||||||
6 | 9 | 12 | 18 | 24 | 30 | 36 | 48 | 54 | |||
1.00 | Longitudinal And Transverse Tensile Strength(KN/m≥) | 6.0 | 9.0 | 12.0 | 18.0 | 24.0 | 30.0 | 36.0 | 48.0 | 54.0 | |
2.00 | Elongation Under Maximum Load In Vertical And Horizontal Direction(%) | 30~80 | |||||||||
3.00 | CBR Burst Strength ( KN≥) | 0.9 | 1.6 | 1.9 | 2.9 | 3.9 | 5.3 | 6.4 | 7.9 | 8.5 | |
4.00 | Tearing Strength (KN,≥,LD/TD) | 0.15 | 0.22 | 0.29 | 0.43 | 0.57 | 0.71 | 0.83 | 1.10 | 1.25 | |
5.00 | Sieve SizeO90,O95 (mm) | 0.05~0.30 | |||||||||
6.00 | Vertical Permeability Coefficient (cm/s) | Kx(10ˉ1-10ˉ3) K=1.00-9.90 | |||||||||
7.00 | Width Variation (%≥) | -0.5 | |||||||||
8.00 | Weight Variation (%≥) | -5 | |||||||||
9.00 | Thickness Deviation Rate(%≥) | -10 | |||||||||
10.00 | Coefficient Of Thickness Variation(%≤) | 10 | |||||||||
11.00 | Dynamic Punch | Hole Diameter(mm≤) | 37.0 | 33.0 | 27.0 | 20.0 | 17.0 | 14.0 | 11.0 | 9.0 | 7.0 |
12.00 | Longitudinal And Transverse Breaking Strength(KN)≥ | 0.3 | 0.5 | 0.7 | 1.1 | 1.4 | 1.9 | 2.4 | 3.0 | 3.5 | |
13.00 | Uv resistance (Xenon Arc Lamp Method) | Vertical And Horizontal Strength Retention(%≥) | 70 | ||||||||
14.00 | Uv resistance (Fluorescent UV Lamp Method) | Vertical And Horizontal Strength Retention(%≥) | 80 |
![]() |