Home > Staple Fiber Geotextile >

Staple Geotextile Separation Fabric For Landfills And Sewage Treatment Plants

Product Categories

HDPE Smooth Geomembrane [52]
HDPE Textured Geomembrane [31]
Compound Geomembrane [35]
Long Fiber Geotextile [31]
Staple Fiber Geotextile [25]
Drainage Geonet [29]
Bentonite Geosynthetic Clay Liner [32]
Geotextile Bag [20]
Biaxial Plastic Geogrid [63]
Impervious Geotextile [2]
Drainage Geotextile Filter Fabric [6]
Anti Seepage Geotextile [2]
Woven Geotextile [5]
Cement Blanket [1]

Changsha Jian-Yi New Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Staple Geotextile Separation Fabric For Landfills And Sewage Treatment Plants

Ask Lasest Price
Brand Name :	JianYi
Model Number :	2m-6m Width and 50m-100m Roll Length
Certification :	ISO 9001
Price :	0.11USD~1.65USD per sqm
Payment Terms :	T/T, L/C
Supply Ability :	500T/month
Delivery Time :	7-15 days

Add to Cart

Product Details
Company Profile

Staple Geotextile Separation Fabric For Landfills And Sewage Treatment Plants

Staple Geotextile Prevent Pollution Spread In Landfills And Sewage Treatment Plants

Product Introduction
Staple fiber geotextile is a geosynthetic material made from staple fiber by nonwoven process. It has many uses in civil engineering.

Product Properties
1. Water permeability: Staple fiber geotextiles allow water to pass through, helping water discharge and reducing pore water pressure in the soil.
2. Filterability: Can filter soil particles, prevent the loss of fine particles, while allowing water to flow.
3. Durability: With good tensile strength and deformation resistance, improve the durability of the project.
4. Corrosion resistance: It has good resistance to most chemical substances and is suitable for a variety of environmental conditions.
5. Antimicrobial: Good resistance to microorganisms and insects.
6. Aging resistance: It has certain resistance to ultraviolet light and weather aging.

Product Application

1. Hydraulic engineering: used for reinforcement and filtration in reservoirs, DAMS, canals and other projects.
2. Road construction: improve the bearing capacity and stability of the roadbed, extend the service life of the road.
3. Environmental engineering: Prevent the spread of pollutants in landfills, sewage treatment plants and other projects.
4. Civil engineering: Used as reinforcement and isolation materials in the construction of tunnels, subways, airports and other infrastructure.
5. Slope engineering: Used for slope protection to prevent soil erosion and landslides.

Product Specification
* Grams/㎡: 100g~800g/㎡
* Width:2m~6m
* Roll length:50m~100m
PS: Customized request accept for all above.

Product Specification and Technical Index (GB/T 17638—2017)

Item		Nominal Breaking Strength(KN/m)
Item		3	5	8	10	15	20	25	30	40
1	Breaking Strength (KN/m,≥,LD/TD)	3.0	5.0	8.0	10.0	15.0	20.0	25.0	30.0	40.0
2	Elongation Rate (%,≥,LD/TD)	20~100
3	Bursting Strength(KN)≥	0.6	1.0	1.4	1.8	2.5	3.2	4.0	5.5	7.0
4	Mass Deviation Rate Per Unit Area(%)	±5
5	Width Variation ( ％)	-0.5
6	Thickness Deviation Rate(%)	±10
7	Sieve Size O90,O95 (mm)	0.07~0.20
8	Vertical Permeability Coefficient (cm/s)	Kx(10ˉ1-10ˉ3) K=1.0-9.9
9	Tearing Strength (KN,≥,MD/CD)	0.10	0.15	0.20	0.25	0.40	0.50	0.65	0.80	1.00
10	Acid And Alkali Resistance (Strength Retention Rate)/%≥	80
11	Antioxidant Performance (Strength Retention Rate)/%≥	80
12	UV Resistance(Strength Retention Rate)/%≥	80

(GB/T17638-1998)

Specification	F100	F150	F200	F250	F300	F350	F400	F450	F500	F600	800	Remark
Item	100	150	200	250	300	350	400	450	500	600	800	Remark
Weight Variation (%)	-8	-8	-8	-8	-7	-7	-7	-7	-6	-6	-6	-
Thickness (mm≥)	0.90	1.20	1.70	2.10	2.40	2.70	3.00	3.20	3.60	4.10	5.00
Width Variation ( ％)	-0.50
Breaking Strength (KN/m,≥,LD/TD)	2.50	4.50	6.50	8.00	9.50	11.00	12.50	14.00	16.00	19.00	25.00
Elongation Rate (%,≥,LD/TD)	25-100
CBR Burst Strength ( KN≥)	0.30	0.60	0.90	1.20	1.50	1.80	2.10	2.40	2.70	3.20	4.00
Sieve Size O90,O95 (mm)	0.07-0.2
Vertical Permeability Coefficient (cm/s)	Kx(10ˉ1-10ˉ3)											K=1.0-9.9
Tearing Strength (KN,≥,MD/CD)	0.08	0.12	0.16	0.20	0.24	0.28	0.33	0.38	0.42	0.46	0.60
1) Specifications according to the mass per unit area, the actual specification between adjacent specifications in the table, according to the interpolation method to calculate the corresponding assessment index, if beyond the scope in the table, shall be determined between supplier and the demander. 2) Unit Weight standards according to the design or agreement. 3) Width as reference indexes for internal control of production, the appraisal based on the actual design value if user raised requests.

Product Tags:


*From:	Your email address is incorrect!
*To:	Changsha Jian-Yi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!