Home > HDPE Textured Geomembrane >

Column Point Rough Surface HDPE Textured Geomembrane Anti Slip Anti Seepage

Product Categories

HDPE Smooth Geomembrane [52]
HDPE Textured Geomembrane [31]
Compound Geomembrane [35]
Long Fiber Geotextile [31]
Staple Fiber Geotextile [25]
Drainage Geonet [29]
Bentonite Geosynthetic Clay Liner [32]
Geotextile Bag [20]
Biaxial Plastic Geogrid [63]
Impervious Geotextile [2]
Drainage Geotextile Filter Fabric [6]
Anti Seepage Geotextile [2]
Woven Geotextile [5]
Cement Blanket [1]

Changsha Jian-Yi New Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Column Point Rough Surface HDPE Textured Geomembrane Anti Slip Anti Seepage

Ask Lasest Price
Brand Name :	JianYi
Model Number :	6m-8m Width and 50m-100m Roll Length
Certification :	ISO9001
Price :	1.38USD~5.5USD per sqm
Payment Terms :	T/T, L/C
Supply Ability :	1200t/month
Delivery Time :	7-15 days

Add to Cart

Product Details
Company Profile

Column Point Rough Surface HDPE Textured Geomembrane Anti Slip Anti Seepage

Anti-Slip And Anti-Seepage HDPE Column Point Rough Surface Geomemofilm With High Friction Coefficient

Product Introduction
Columnar point rough surface geomembrane is a special type of geomembrane, which increases its friction coefficient and adhesion by adding columnar or point-like texture to the surface of the film.

Product Properties
1. Surface texture: The surface of the cylindrical point rough geomembrane has columnar or point-like textures that provide additional friction and prevent the geomembrane from sliding on slopes.
2. High coefficient of friction: The column point design allows the geomembrane to have a higher coefficient of friction when in contact with the soil.
3. Impermeability: It maintains the basic impermeability function of the geomembrane and effectively prevents the penetration of water and pollutants.
4. Chemical corrosion resistance: It has good chemical corrosion resistance and can resist the erosion of various chemical substances.
5. Environmental stress cracking resistance: It is not easy to crack in harsh environments and maintains good stability.
6. Temperature adaptability: It has good heat resistance and cold resistance and is suitable for different climatic conditions.

Product Application
1. Slope engineering: Especially suitable for slope seepage prevention projects that need to enhance stability.
2. Landfill: used for slope anti-slip and anti-seepage of landfill to improve the safety and environmental protection of the project.
3. Tailings pond: used in the seepage prevention and stabilization project of tailings pond to prevent the leakage of harmful substances.
4. Water conservancy project: Used in reservoirs, DAMS and other water conservancy projects to enhance the anti-seepage capacity of the structure.

Products series
Single textured geomembrane, double-wall textured geomembrane.

Product Specification
* Thickness(mm): 0.30mm~3.00mm
* Width: 4m~8m
* Roll length: 50m~100m (customized request accept)
PS: Customized request accept for all above.

Geomembrane Series

Textured HDPE Geomembrane For Landfill (GB/T 17643-2011(GH-2T1,GH-2T2))

Serial Number	Project	Index
Serial Number	Thickness(mm)	0.75	1.00	1.25	1.50	2.00	2.50	3.00
1	Density (g/c㎡,≥)	≥0.940
2	Textured Highth (mm)	≥0.25
3	Yield Strength (N/mm,LD/TD)	≥11	≥15	≥18	≥22	≥29	≥37	≥44
4	Breaking Strength (N/mm,LD/TD)	≥8	≥10	≥13	≥16	≥21	≥26	≥32
5	Yeild Elongation Rate (%)	≥12
6	Breaking Elongation Rate (%)	≥100
7	Rectangular Tear Strength (N)	≥93	≥125	≥160	≥190	≥250	≥315	≥375
8	Puncture Strength (N)	≥200	≥270	≥335	≥400	≥535	≥670	≥800
9	Tensile Load Stress Cracking (Notch Constant Load Tensle Method) h	≥300
10	Carbon Black Content(Rang) (%)	2.0~3.0
11	Carbon Black Dispersion	There is not more than one grade 3 in 10 data, and grade 4 and grade 5 are not allowed
12	Oxidative Induction Time (OIT)	Standard OIT (min)≥100
12	Oxidative Induction Time (OIT)	High Pressure OIT (min)≥400
13	85℃ thermal aging (Atmospheric Pressure OIT Retention After 90 Day)	≥55
14	Ultraviolet Irradiation After 1600 Hours, The OIT Retention(%)	≥50

(CJ-T234-2006)

Specification	1.00mm	1.25mm	1.50mm	2.00mm	2.50mm	3.00mm	Remark
Item
Thickness (mm)	1.00mm	1.25mm	1.50mm	2.00mm	2.50mm	3.00mm
Textured Highth (mm)	0.25
Density (g/c㎡,≥)	0.94
Tensile Properties
Yield Strength (N/mm,LD/TD)	15	18	22	29	37	44
Breaking Strength (N/mm,LD/TD)	10	13	16	21	26	32
Yeild Elongation Rate (%)	12
Breaking Elongation Rate (%)	100
Rectangular Tear Strength (N)	125	156	187	249	311	374
Puncture Strength (N)	267	333	400	534	667	800
Environmental Stress Crack Resistance (h) (A single point of incision constant tensile method)	300
Carbon Black
Carbon Black Content(Rang) (%)	2.0~3.0
Carbon Black Dispersion	Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3
Oxidative Induction Time (OIT)
Standard OIT (min)	100
High Pressure OIT (min)	400
85℃ Oven Ageing (Minimum Average)
90 days after baking, the standard OIT retention(%)	55
90 days after baking, the hight pressure OIT retention(%)	80
The Anti-UV Strength
Ultraviolet irradiation after 1600 hours, the standard OIT retention(%)	50
Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%)	50
-70℃ The Low Temperature Embrittlement Performance mpact	Pass
Water Vapor Penetration Coefficient g.cm (cm2.s.Pa)	≤1.0X10-13
Dimensional Stability	±2

Product Tags:


*From:	Your email address is incorrect!
*To:	Changsha Jian-Yi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!