Special Biaxial Plastic Geogrid For Waste Restoration And Waste
Disposal
Product Introduction
High strength bidirectional plastic geoggrid is a kind of
geomaterial made of high polymer through extrusion, plate forming,
punching process and then through longitudinal and transverse
stretching. The material has great tensile strength both
longitudeand laterally, and this structure can provide a more
effective force bearing and diffusion chain system in the soil,
which is suitable for large-scale foundation reinforcement bearing
weight.
Product Property
1. Network structure: Approximately square in appearance, providing
a large surface area to increase the bite force and stability of
the soil.
2. Material source: Mainly made of polypropylene polymer,
environmentally friendly and recyclable.
3. Mechanical properties: It has great tensile strength in both
transverse and longitudinal aspects, which improves the tensile
strength and stiffness of the material.
4. Excellent durability: acid and alkali resistance, corrosion
resistance, not easy to degrade, long service life.
5. Convenient construction: light weight, convenient transportation
and construction, can greatly reduce labor intensity and reduce
construction time.
6. Environmental protection and effective: the production process
is pollution-free, and all raw materials can be recycled.
7. Widely used: suitable for the construction of roads, railways,
airports and other infrastructure.
Product Application
1. Soft foundation reinforcement and subgrade reinforcement
2. Slope protection
3. Reinforcement of tunnel wall
4. Foundation reinforcement
5. Waste land restoration and waste disposal
6. Animal husbandry nets and mining reinforcement
Product Specification and Technical Index
| Specification Item | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG35-35 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
| Unit Weight (g/m2) | 300 ± 30 | 330 ± 30 | 380 ± 30 | 400 ± 30 | 450 ± 30 | 500 ± 30 | 550 ± 30 | 600 ± 30 |
| Width (m) | 4.0 5.0 | 4.0 5.0 | 4.0 5.0 | 4.0 5.0 | 4.0 5.0 | 4.0 5.0 | 4.0 5.0 | 4.0 5.0 |
| Tensile Strength (KN/m≥, LD) | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
| Tensile Strength (KN/m≥, TD) | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
| Yield Elongation (%≤, LD) | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 |
| Yield Elongation (%≤, TD) | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
| Tensile Strength at 2% Elongation (KN/m≥, LD) | 5 | 7 | 9 | 10.5 | 12 | 14 | 16 | 17.5 |
| Tensile Strength at 2% Elongation (KN/m≥, TD) | 5 | 7 | 9 | 10.5 | 12 | 14 | 16 | 17.5 |
| Tensile Strength at 5% Elongation (KN/m≥, LD) | 7 | 14 | 17 | 21 | 24 | 28 | 32 | 35 |
| Tensile Strength at 5% Elongation (KN/m≥, TD) | 7 | 14 | 17 | 21 | 24 | 28 | 32 | 35 |
